Home FAQ IcoTune Why does the SWR indicator not indicate during the tune cycle, but appear to work normally when transmitting?
American Radio Relay League | Ham Radio Association and Resources
Why does the SWR indicator not indicate during the tune cycle, but appear to work normally when transmitting? PDF Print E-mail
Written by Administrator   
Friday, 02 May 2008 20:31
The 7000 SWR indication is suppressed during the tune cycle by the firmware in the transceiver because the SWR is assumed to be measured externally, as it is when you have an automatic tuner connected. You will need to attach an external SWR indicator between the transceiver and antenna when using the IcoTune.
 
Copyright © 2010 Projects by N5BIA. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.